Donc EV-ULTRA3C6.0CAT5 Pwr/Cat5 Cbl 6mm

EV-Ultra® - Power & Data Combined (Cat5)

EV-Ultra® is designed for use in the installation of electric vehicle charge points. The cable incorporates power conductors and a 4 pair screened data cable, encapsulated in a double sheathed design for extra protection.
This innovative cable gives a solution to installers where both power and data are required, and allows a quicker, neater, easier install to be achieved.
These cables are designed to be installed in air, clipped to surface, on cable tray/ ladder work and embedded in concrete.

EV-ULTRA IS NOW BASEC APPROVED.

KEY FEATURES:

• Power and Data Combined in One Cable
  
• Designed for EV Charger Installations and Other Applications Where Both Power and Data Are Required
  
• Easier to Route Through Walls and Buildings
  
• Saves on Installation Time
  
• Provides a Neater Installation
  
• Double Sheathed Design for Extra Protection
  
• Tuff Heat Resistant Sheathing
  
• 1.25mm SWA Protection
  
• Can be Installed in Air, on Ladders Work and Cable Trays, Surface Clipped and Embedded in Concrete
  
• Can be Laid Directly in the Ground if Suitable Mechanical Protection is Provided
  
• Power Conductors and Data Cables are Rated to Same Nominal Voltage
  
• Screened, Twisted Pair Data Cables and Lay Length to Reduce Interference
  
• Insulation: Thermosetting XPLE Type GP8 to BS 7655-1.3
  
• Conductor: Plain Annealed Copper Class 2 Stranded to BS EN 60228
  
• 3 Core: Yellow/Green, Blue & Brown
  
• Max. Current:58A
  
• Voltage Drop 9mV/A/m): 7.9
  
• Min/Max Operating Temperature:  -15°C/90°C
  
• Minimum Bending Radius: 8xØ
  
• Nominal Stranding of Conductor: 7/1.04mmmm
  
• Nominal Radial Thickness of Insulation: 0.7mm
  
• Nominal Overall Diameter of Bedding: 13.6mmØ
  
• Nominal Radial Thickness of Sheath: 1.0mm
  
• Approx. Overall Diameter: 18.6mm
  
• Approx. Weight: 700kg/km